Sheet Metal Design Site Map

Sheet Metal Design Site Map Preface Using This Product More Information What’s New? Getting Started Entering the Workbench Defining the Parameters Creating the First Wall Creating the Side Walls Creating a Cutout Creating Automatic Bends Unfolding the Part Extracting Drawings Basic Tasks Managing the Default Parameters Editing the Parameters Bend Extremities Bend Corner Relief Bend Allowance Creating Walls From an Existing Solid From a Sketch Tangent Walls From an Edge Extruding Isolating Walls Creating Rolled Walls Creating Bends Site Map http://arbredsy/FmoCXR8/SheEnglish/sheug. oc/src/sheugsm. htm (1 of 4) [12/7/2001 5:13:18 PM] Bends from Walls Automatic Bends Conical Bends Bends From Line Creating Swept Walls Creating a Flange Creating a Hem Creating a Tear Drop Creating a Swept Flange Redefining Swept Walls Limits Displaying Swept Walls Axes Unfolding Folded/Unfolded View Access Concurrent Access Creating a Cutout Stamping Standard Features Point Stamp Extruded Hole Curve Stamp Surface Stamp Bridge Louver Stiffness Rib Creating User-defined Stamping Features Punch and Matrix Opening and Cutting faces Editing User-Defined Stamps Patterning Site Map ttp://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugsm. htm (2 of 4) [12/7/2001 5:13:18 PM] Rectangular Patterns Circular Patterns User-Defined Patterns Corner Relief Redefining a Corner Relief Creating a Local Corner Relief Creating Corners Creating Chamfers Mapping Elements Saving As DXF Reference Elements Advanced Tasks Integration with Part Design Designing in Context Designing… Modifying… PowerCopies Management Creating PowerCopies Instantiating PowerCopies Saving PowerCopies Looking For Sheet Metal Features Workbench Description Menu Bar Sheet Metal Toolbar Constraints Toolbar
Reference Elements Toolbar Specification Tree Customizing Site Map http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugsm. htm (3 of 4) [12/7/2001 5:13:18 PM] Glossary Index Site Map http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugsm. htm (4 of 4) [12/7/2001 5:13:18 PM] Preface The V5 CATIA – Sheet Metal Design is a new generation product offering an intuitive and flexible user interface. It provides an associative feature-based modeling making it possible to design sheet metal parts in concurrent engineering between the unfolded or folded part representation.
V5R7 CATIA – Sheet Metal Design offers the following main functions: Associative and dedicated Sheet Metal feature based modeling Concurrent engineering between the unfolded or folded part representation Access to company defined standards tables Dedicated drawing capability including unfolded view and specific settings. All sheetmetal specifications can be re-used by the CATIA – Knowledge Advisor to capture corporate knowledge and increase the quality of designs. Natively integrated, CATIA – Sheet Metal Design offers the same ease of use and user interface consistency as all CATIA V5 applications.

As a scalable product, CATIA Version 5 Sheet Metal Design can be used in cooperation with other current or future companion products in the next CATIA generation such as CATIA Version 5 Assembly Design and CATIA Version 5 Generative Drafting. The widest application portfolio in the industry is also accessible through interoperability with CATIA Solutions Version 4 to enable support of the full product development process from initial concept to product in operation. Using This Product More Information Preface http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugpr01. htm [12/7/2001 5:13:19 PM] Using This Product
This guide is intended for the user who needs to become quickly familiar with the CATIA Version 5 Sheet Metal Design product. The user should be familiar with basic Version 5 concepts such as document windows, standard and view toolbars. To get the most out of this guide, we suggest you start reading and performing the step-by-step tutorial “Getting Started”. The next sections deal with the handling of more detailed capabilities of the product. Using This Product http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugpr03. htm [12/7/2001 5:13:19 PM] Where to Find More Information
Prior to reading this book, we recommend that you read the Infrastructure User’s Guide. The Part Design User’s Guide, the Assembly Design User’s Guide and the Generative Drafting User’s Guide may prove useful. Finally, you can read the Sheet Metal Production User’s Guide to find out more about that product and to fully use the interoperability between the two products. Conventions More Information http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugpr04. htm [12/7/2001 5:13:19 PM] What’s New? This table identifies what new or improved capabilities have been documented in Version 5 Release 8 of the Sheet Metal Design workbench.
Basic Tasks New: Creating chamfers New: Displaying swept wall axes New: Saving as DXF Enhanced: Creating walls from an existing Part Enhanced: Creating walls from an edge Enhanced: Extruding Enhanced: Defining bend extremities when manually creating bends from walls or automatically creating them Enhanced: Stamping Enhanced: User interface of user-defined stamping features (punch and die and cut-out and opening faces). Enhanced: Choice of convex/concave edges when creating corners Enhanced: Mapping elements Advanced Tasks Enhanced: Creating PowerCopy Features Enhanced: Instantiating PowerCopy Features
What’s New? http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugwn. htm [12/7/2001 5:13:19 PM] Getting Started Before getting into the detailed instructions for using Version 5 CATIA – Sheet Metal Design, the following tutorial provides a step-by-step scenario demonstrating how to use key functionalities. The main tasks proposed in this section are: Entering the Workbench Defining the Parameters Creating the First Wall Creating the Side Walls Creating a Cutout Creating Automatic Bends Unfolding the Part Extracting Drawings All together, these tasks should take about 15 minutes to complete. Getting Started ttp://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs01. htm [12/7/2001 5:13:19 PM] Entering the Sheet Metal Workbench The Sheet Metal Design functions are available when you are in the Part environment. Several functions are integrated from the Part Design workbench. This task shows how to enter the workbench. Choose the Mechanical Design -> Sheet Metal Design item from the Start menu. The Sheet Metal toolbar is displayed and ready to use. You may add the Sheet Metal Design workbench to your Favorites, using the Tools -> Customize item. For more information, refer to the Infrastructure User’s Guide.
Entering the Workbench http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs00. htm (1 of 2) [12/7/2001 5:13:20 PM] Defining the Sheet Metal Parameters This task shows you how to configure the sheet metal parameters. 1. Click the Sheet Metal Parameters icon . The Sheet Metal Parameters dialog box is displayed. 2. Enter 1mm in the Thickness field. 3. Enter 5mm in the Bend Radius field. 4. Select the Bend Extremities tab. 5. Select Tangent in the Bend Extremities combo list. An alternative is to select the bend type in the graphical combo list. Click OK to validate the parameters and close the dialog box.
The Sheet Metal Parameters feature is added in the specification tree. 6. Defining the Parameters http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs02. htm (1 of 2) [12/7/2001 5:13:20 PM] The other two tabs are not used in this scenario. Defining the Parameters http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs02. htm (2 of 2) [12/7/2001 5:13:20 PM] Creating the First Wall This task shows how to create the first wall of the Sheet Metal Part. 1. Click the Sketcher icon then select the xy plane. 2. Select the Profile icon . 3. Sketch the contour as shown below: Click the Exit workbench icon to return to the 3D world.
The sketch remains selected. 4. Click the Wall icon . The Wall Definition dialog box opens. 5. Creating the First Wall http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs03. htm (1 of 2) [12/7/2001 5:13:20 PM] By default, the Material Side is set to the top. Click OK. The Wall. 1 feature is added in the specification tree 6. The first wall of the Sheet Metal Part is known as the Reference wall. Creating the First Wall http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs03. htm (2 of 2) [12/7/2001 5:13:20 PM] Creating the Side Walls This task shows you how to add other walls to the Sheet Metal part. Click the Wall on Edge icon .
The Wall On Edge Definition dialog box opens. 1. 2. Select the left edge. Enter 50mm in the Value field. The application previews the wall. 3. By default, the material side is such that it ensures a continuity with the reference profile. If needed, invert it using the Reverse side button, or clicking the arrow. 4. Click the Reverse Position button to Invert the sketch profile. Click OK. The wall is created and the Wall On Edge. 1 feature is displayed in the specification tree: 5. Creating the Side Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs04. htm (1 of 3) [12/7/2001 5:13:21 PM] 6. Select the right edge.
Click the Wall on Edge icon again. The Wall On Edge Definition dialog box opens with the parameters previously selected. 7. 8. Invert the sketch profile and click OK to validate. Click the Wall on Edge icon again. 9. Select the front edge. The Wall Definition dialog box opens with the parameters previously selected. 10. Enter 30mm in the Value field and 10mm in the Limit1 and Limit2 fields, then invert the sketch profile. 11. 12. Press OK to validate. Creating the Side Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs04. htm (2 of 3) [12/7/2001 5:13:21 PM] The final part looks like this: Creating the Side Walls ttp://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs04. htm (3 of 3) [12/7/2001 5:13:21 PM] Creating a Cutout In this task, you will learn how to: open a sketch on an existing face define a contour in order to create a cutout. Select Wall On Edge. 2 from the geometry area to define the working plane. 1. 2. Click the Sketcher icon . 3. Click the Elongated Hole icon to create the contour. To access the oblong profile, click the black triangle on the Rectangle icon. It displays a secondary toolbar. Click to create the first point and drag the cursor. 4. Click to create the second point. The first semi-axis of the rofile is created. 5. Drag the cursor and click to create the third point. The second semi-axis is created and the oblong profile is displayed. 6. 7. Click the Exit workbench icon to return to the 3D world. Creating a Cutout http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs05. htm (1 of 2) [12/7/2001 5:13:21 PM] 8. Select the Cutout icon . The Pocket Definition dialog box is displayed and a cutout is previewed with default parameters. 9. Set the Type to Up to last option to define the limit of your cutout. This means that the application will limit the cutout onto the last possible face, that is the opposite wall. 0. Click OK. This is your cutout: Creating a Cutout http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs05. htm (2 of 2) [12/7/2001 5:13:21 PM] Creating the Bends Automatically This task shows how to create the bends automatically. Click the Automatic Bends icon . The bends are created. 1. CATIA displays the bends creation in the specification tree: Automatic Bends. 1 The Sheet Metal part looks like this: Creating Automatic Bends http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs06. htm [12/7/2001 5:13:21 PM] Unfolding the Sheet Metal Part This task shows how to unfold the part. 1.
Click the Unfold icon . The part is unfolded according to the reference wall plane, as shown below. Note that the bend limits are displayed in the unfolded view. To refold the part, click the Unfold icon again. Unfolding the Part http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs07. htm [12/7/2001 5:13:21 PM] Extracting Drawings from the Sheet Metal Part This task shows how to create the Sheet Metal Part views in the Generative Drafting workbench. The Sheet Metal part is displayed. 1. Click or select File -; New… 2. Select the Drawing type and click OK. The Generative Drafting workbench is launched.
The New Drawing dialog box opens. 3. Click OK. For more information about this workbench, refer to Generative Drafting User’s Guide. 4. The drawing sheet appears. 5. Tile the windows horizontally using the Window -> Tile Horizontally menu item. 6. Select the Unfolded View icon in the Projections toolbar from Generative Drafting Workbench. This icon is added to the Projections toolbar provided the Sheet Metal workbench is present. Choose the xy plane in the Sheet Metal specification tree. The unfolded view is displayed with the bends axes and limits. 7. Eventually, the Drafting sheet looks like this:
Extracting Drawings http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs08. htm (1 of 2) [12/7/2001 5:13:22 PM] Extracting Drawings http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheuggs08. htm (2 of 2) [12/7/2001 5:13:22 PM] Basic Tasks The Basic Tasks section explains how to create and modify various kinds of features. Managing the Default Parameters Creating Walls Extruding Isolating Walls Creating Rolled Walls Creating Bends Creating Swept Walls Unfolding Creating a Cutout Stamping Patterning Corner Relief Creating Corners Creating Chamfers Mapping Elements Saving As DXF Reference Elements Basic Tasks ttp://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0000. htm [12/7/2001 5:13:22 PM] Managing the Default Parameters This section explains and illustrates how to use or modify various kinds of features. The table below lists the information you will find. Using Sheet Metal Design assumes that you are in a CATPart document. Edit the parameters: select the Parameters tab et the wall thickness and bend radius values. Modify the bend extremities : select the Bend Extremities tab and choose a predefined bend type. Define the bend corner relief: select the Bend Corner Relief tab and choose a predefined corner relief type.
Define the bend allowance: select the Bend Allowance tab and define the allowance value (K factor). Managing the Default Parameters http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0100. htm [12/7/2001 5:13:22 PM] Editing the Sheet and Tool Parameters This section explains how to change the different sheet metal parameters. Click the Sheet Metal Parameters icon . 1. The Sheet Metal Parameters dialog box is displayed. 2. Change the Thickness if needed. 3. Change the Bend Radius if needed. Convention dictates that the inner angle between the two walls is used to define the bend. It can vary from 0° to 180° exclusive.
This angle is constant and the bend axis is rectilinear. Press the Sheet Standards Files… button to access to the company defined standards, if need be. For more information, refer to the Customizing section. 4. 5. Click OK to validate the Sheet Metal Parameters. When the Check all bend radius button is checked, and you click OK in the Sheet Metal Parameters dialog box, a list is displayed with all the bends the part that do not use the standard Bend Radius value as defined in step 3. Editing the Parameters http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0101. htm [12/7/2001 5:13:22 PM] Modifying the Bend Extremities
This section explains how to change the bend extremities. Click the Sheet Metal Parameters icon . The Sheet Metal Parameters dialog box is displayed. 1. The second tab concerns the bend extremities. A combo box displays the six possible axial relimitations for the straight bend: These options can also be accessed through the pop-up button: Bend Extremities http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0103. htm (1 of 2) [12/7/2001 5:13:22 PM] Maximum: the bend is calculated between the furthest opposite edges of the supporting walls. Bend Extremities http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0103. tm (2 of 2) [12/7/2001 5:13:22 PM] Minimum with no relief: the bend corresponds to the common area of the supporting walls along the bend axis. Square relief: a square relief is added to the bend extremity. The L1 and L2 parameters can be modified if need be. Round relief: a round relief is added to the bend extremity. The L1 and L2 parameters can be modified if need be. Linear: the unfolded bend is split by two planes going through the corresponding limit points (obtained by projection of the bend axis onto the edges of the supporting walls). >Tangent: the edges of the bend are tangent to the edges of the supporting walls.
Bend Corner Relief This section explains how to change the bend corner relief. Open the CornerRelief01. CAPTPart model from the samples directory. Within the Tools -> Options -> General -> Parameters -> Knowledge tab, check the Load Extended Language Libraries option. See Customizing Knowledgeware Applications. Click the Sheet Metal Parameters icon . 1. The Sheet Metal Parameters dialog box is displayed. The third tab concerns the bend corner relief. By default, no corner relief is created when a bend is created. Check the Automatic corner relief creation option to activate this creation every time a bend is created.
Three corner relief types are available. Select the icon corresponding to the requested type: : square: the square corner relief is created using the bend limits. Its dimensions are defined by the width of the unfolded bends. : circular: its center is located at the intersection of the bend axes. For that option, a radius is proposed by default. It is equal to the bend radius + the thickness. To change it: Selecting Formula -> Deactivate from the contextual menu of the input field and enter a new value, clicking on the button and entering a new formula. Bend Corner Relief http://arbredsy/FmoCXR8/SheEnglish/sheug. oc/src/sheugbt0104. htm (1 of 3) [12/7/2001 5:13:23 PM] : triangular: the triangular relief is created from the intersection point of the inner bend limits towards the intersection points of the outer bend limits with each wall. The corner relief is not previewed during its creation. The corner relief is taken into account in the unfolded view. For better result, you should select the Maximum Bend Extremities option when creating corner relief. These parameters are applied to each corner relief created or to be created, except to those with that have been redefined, or the locally defined corner relieves.
Bend Corner Relief http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0104. htm (2 of 3) [12/7/2001 5:13:23 PM] Defining the Bend Allowance This section explains the calculations related to folding/unfolding operations. Click the Parameters icon . 1. The Sheet Metal Parameters dialog box is displayed. The fourth tab concerns the bend allowance. When a bend is unfolded, the sheet metal deformation is represented by the bend allowance V, defined by the formula: L = A + B + V where: L is the total unfolded length A and B the dimensioning lengths as defined on the figures below: bend < 90° bend > 90°
Bend Allowance http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0102. htm (1 of 3) [12/7/2001 5:13:23 PM] Another way to compute the sheet metal deformation is the neutral fiber definition (K Factor): W = a * (R + k * T) where: W is the flat bend width R the inner bend radius T the sheet metal thickness a the inner bend angle in radians. If b is the opening bend angle in degrees: a = p * (180 – b) / 180 Physically, the neutral fiber represents the limit between the material compressed area inside the bend and the extended area outside the bend. Ideally, it is represented by an arc located inside the thickness and entered on the bend axis. Therefore the K Factor always has a value between 0 and 0. 5. When you define the sheet metal parameters, a literal feature defines the default K Factor, according to the DIN standard: K = (0. 65 + log(R / T) / 2) / 2 This formula can be deactivated or modified using Knowledge Advisor workbench. When a bend is created, the bend K Factor and the bend allowance literals are created. Two cases may then occur: If the Sheet Metal K Factor has an activated formula and uses the default bend radius as input parameter, the same formula is activated on the bend K Factor with the bend radius as input.
Else the bend K Factor is a formula equal to the Sheet Metal K Factor. The bend allowance literal is equal to a formula representing the use of the bend K Factor. This formula is fairly complex and it is strongly recommended not to delete it. V = a * (R + k * T) – 2 * (R + T) * tan ( min(p/2,a) / 2) Though it is possible to deactivate the formula to enter a fixed value. Finally, the bend flat width is computed from the bend allowance value. The bend allowance can be locally redefined when creating bends from walls, generating bends automatically, Bend Allowance http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0102. tm (2 of 3) [12/7/2001 5:13:23 PM] Creating Walls This section explains and illustrates different methods to create walls. Create walls from an existing Part: click the icon, and select a face of a wall Create a wall from a sketch: use the sketcher to define the profile, and set the material side. Create a wall tangent to another one: select a profile coincident with an existing wall, and select the wall to which it should be tangent Create a wall from an edge: select a wall edge, set the height, limits, angle, then the sketch and material sides Creating walls http://arbredsy/FmoCXR8/SheEnglish/sheug. oc/src/sheugbt0800. htm [12/7/2001 5:13:23 PM] Creating Walls From an Existing Part This task illustrates how to create a Sheet Metal part using an existing Part, that is recognizing the thin part shapes of the Part as created using the Part Design workbench or from a CATIA Version 4 Solid for example. Open the WallScenario1. CATPart document from the samples directory. The document contains a Part created in the Part Design workbench and it looks like this: 1. Click the Walls Recognition icon 2. Click any face to be the reference wall. The Walls Recognition Definition dialog box is displayed. 3.
Choose the Wall creation mode: Part body recognition: the whole solid is processed and walls are created wherever possible Only selected faces: only explicitly selected faces of the solid are processed and the corresponding walls are created. The Reference wall is indicated in the Walls Recognition Definition dialog box for information only (it is grayed out). From an Existing Solid http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0201. htm (1 of 3) [12/7/2001 5:13:23 PM] Select faces as the Compulsory walls. These are faces from which the walls are to be generated when there might be an ambiguity.
For example, if the initial part is a box, you will need to select two opposite inner faces and outer faces on the other two sides of the box, in order to avoid overlapping when generating the walls. 4. 5. Set the Internal profiles recognition mode: As cut out wall: generates walls with inner contours (no cutout feature is generated) One cut out by wall: regardless of how many pockets there are on a face of the solid, only one cutout feature is generated per wall One cut out by profile: for each inner contour on the sketch-based solid, a cutout feature is generated None: whether there are pockets on the solid aces, or not, no cutout feature is created in the resulting SheetMetal features. The Generate Bends check button allows the automatic creation of bends as the walls are being created, wherever applicable. 6. Click Apply. The walls are generated from the Part Design geometry. The Walls Recognition. 1 feature is added to the tree view. At the same time, the Sheet Metal parameters are created, deduced from the Part geometry. Select the icon to display the sheet metal parameters: 7. the Thickness is equal to 1mm the Bend radius is twice the thickness value the Bend Extremities field is set to Square relief.
From an Existing Solid http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0201. htm (2 of 3) [12/7/2001 5:13:23 PM] You can modify a few of these parameters The Thickness parameter cannot be modified because it is based, like the bend extremities and radius, on the initial solid geometry . However you can modify these parameters (bend radius and bend extremities) to be taken into account for sheet metal features other than the “recognized” ones. The bend allowance, being used to unfold the part, and the corner relief affect all features, and therefore can be edited even for “recognized” features. . Click OK in the Sheet Metal Parameters when all parameters have been redefined where needed. The solid is now a Sheet Metal part. All the features are displayed in the specification tree. Once the solid has been converted to a Sheet Metal part, you can create bends as with any other Sheet Metal part, or modify/add Sheet Metal features to complete the design. Uncheck the Generate Bends button, if you do not wish bends to be created automatically. From an Existing Solid http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0201. htm (3 of 3) [12/7/2001 5:13:23 PM] Creating Walls from a Sketch
This task shows how to create a wall from a sketch. You must be in the Sheet Metal Workbench, with a . CATPart document open, and you must have defined the Sheet Metal parameters. Set the sketcher grid to H = 100mm and V = 100mm, using the Tools -> Options, Mechanical Design -> Sketcher, Sketcher tab. 1. Click the Sketcher icon then select the xy plane. 2. Select the Profile icon . 3. Sketch the contour as shown below: 4. Click the Exit workbench icon to return to the 3D world. Click the Wall icon . The Wall Definition dialog box opens. 5. By default, the Material Side is set to the top.
From a Sketch http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0801. htm (1 of 3) [12/7/2001 5:13:24 PM] Click OK. The Wall. 1 feature is added in the specification tree. 6. The first wall of the Sheet Metal Part is known as the Reference wall. Click the sketcher icon from the Wall Definition dialog box, if you wish to directly edit the selected sketch. When exiting the sketcher, you then go back to the wall creation step, without having to reactivate the Wall icon. This is also very useful if you have selected an edge from a wall and clicked the Wall icon . In this case, the sketcher is utomatically activated and the plane defined as being the selected edge’s plane. You can then directly draw a sketch, then exit the sketcher and return to the wall creation step. From a Sketch http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0801. htm (2 of 3) [12/7/2001 5:13:24 PM] You can directly create a wall with a hole, by selecting a sketch with an inner contour (the contours must not intersect): Sketch with inner contour Resulting wall Note however, that the emptied area is part of the wall and is not a separate cutout that can be edited. From a Sketch ttp://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0801. htm (3 of 3) [12/7/2001 5:13:24 PM] Creating Tangent Walls This task shows how to create a wall tangent to a planar part of another wall or of a flange. This capability will then allow this tangent wall to be seen when unfolding the part, even though there is no bend linking it to its tangent support, provided this support is unfoldable too. Open the TangentWall1. CATPart document from the samples directory. Select a face of an existing wall and click the Sketcher icon . Here we selected the flange’s planar face. 1. 2.
Select the Profile icon and sketch the contour as shown below: Using the Constraint Defined in Dialog box icon, set coincidence constraints between the edges where the support and sketch are to coincide. 3. 4. Click the Exit workbench icon to return to the 3D world. Make sure the sketch is still active, then click the Wall icon . 5. The Wall Definition dialog box opens. Tangent Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0803. htm (1 of 3) [12/7/2001 5:13:24 PM] Note the orientation of the wall to be created. Click inside the Tangent to field, then select the wall to hich the new wall has to be tangent. 6. Here, you need to select the planar face of the flange. Note that the orientation automatically changes to conform to the material orientation already defined on the support wall. Click OK. The wall is created and a Wall. xxx feature is added in the specification tree. 7. Tangent Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0803. htm (2 of 3) [12/7/2001 5:13:24 PM] If you want to create the wall on a wall that cannot be unfolded, the system issues a warning and prevents you from creating the tangent wall. Tangent Walls ttp://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0803. htm (3 of 3) [12/7/2001 5:13:24 PM] Click the Unfold icon . The tangent wall is unfolded as a wall linked by a bend to another wall, would be. 8. Creating Walls From An Edge This task shows how to create walls from edges of an existing wall. This function is used to create a box in an easy and quick way from an existing reference wall. At least one wall must already exist. Open the Wall1. CATPart document from the samples directory. Click the Wall on Edge icon and select an edge of an existing wall. 1. The Wall On Edge
Definition dialog box is displayed together with a preview of the wall. Define the type of wall to be created by specifying the Reference, that is: 2. the Height of the wall: that is the orthogonal projection from the top of the wall on edge to the reference wall. Select the icon to define the height of the wall from the bottom of the reference wall or the icon to define the height of the wall from the top of the reference wall. the Length of the wall: that is the absolute value of the wall on edge without bend. From an Edge http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0802. tm (1 of 6) [12/7/2001 5:13:25 PM] the limits of the wall: LIM1 and LIM2. These texts only indicate on which side a given limit is. They are not precisely on the limit spots. The actual locations of the limits are defined with the icons and an input distance that is taken into account respectively from the inner side of an existing bend, the inner side of an existing wall or the outer side of an existing wall. the angle of the wall: by default it is perpendicular to the plane containing the edge. You may modify it according to your needs. it is updated dynamically on the screen. This preview gives information about: he Sketch Profile: by default, if you pick an edge on the top of the reference wall, the direction of the wall is upwards, if you pick an edge on the bottom of the reference wall the direction of the wall is downwards. Preview with top edge selected Preview with bottom edge selected You can invert the sketch’s position, and therefore the wall’s, using the Reverse Position button. Preview with bottom edge selected and sketch profile inverted From an Edge http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0802. htm (2 of 6) [12/7/2001 5:13:25 PM] the material side: by default the aterial side is proposed so as to keep a continuity with the reference profile. However, you can change it by clicking the red arrow or the Reverse Side button. Check the Clearance option to offset the wall on edge from the selected edge. 3. The entered value is the radius of the bend on this edge. Wall on edge with clearance Wall on edge without clearance Note that the reference wall remains unchanged when changing the bend radius value. It is the Wall on Edge’s length that is affected. You can also choose to create the wall with or without a bend by checking the With Bend option. 4.
If there is no wall from which a limit can be computed, the reference element is the edge of the reference wall. From an Edge http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0802. htm (3 of 6) [12/7/2001 5:13:25 PM] A wall on edge is defined by the selected edge (reference edge). When the reference edge is modified, by adding any feature that shortens the edge (a bend to an adjacent wall on edge or a cutout for example) the wall on edge based on this reference edge is recomputed. To avoid this you may: create the bend manually on the wall modifying the edge used as the reference to create the other wall eorder the creation of walls to postpone the creation of the modifying feature Both limits are computed with the same reference icon. The bend is not previewed, even if the option With Bend is checked. However it will be created. The selected options are modal and will be proposed to create the next wall. Walls on edge being contextual features, if you break the profiles continuity by inverting the material side of a wall, you may have to manually re-specify all features based upon the modified one, even if they are not directly connected to the modified wall, in order to update the part afterwards.
This is the case when creating a wall on edge from another wall on edge, for example: From an Edge http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0802. htm (4 of 6) [12/7/2001 5:13:25 PM] If you invert the material side of the reference wall on which the first wall on edge has been created, both walls on edge are relocated (as if you were flipping the geometry): If you invert the material side of the first wall on edge (and not the material side of the reference wall), the second wall on edge is relocated. Indeed, its specification being relative to the first wall on edge, when its input data (i. e. he edge selected on the first wall on edge) is modified, the second wall on edge is rebuilt at a new location. 5. Click OK in the Wall On Edge Definition dialog box. A WallOnEdge. x element is created in the specification tree. A WallOnEdge. x element can be edited: double-click it in the graphic area or in the specification tree to display its creation dialog box and modify the parameters described above, including the edge from which it is created. However, the sketch of a wall on edge cannot be edited directly. Would you need to edit the sketch of a wall on edge, you have to isolate it first. See Isolating Walls.
You can cut or copy and paste a wall on edge. If you cut and paste a wall on edge with children elements, these children elements are lost. This may result in update errors. You cannot undo an Isolate action after having modified the wall. Isolating a wall on edge erases all updating data. From an Edge http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0802. htm (5 of 6) [12/7/2001 5:13:25 PM] Extruding This task explains how to create a wall by extrusion. You must have defined the Sheet Metal parameters. A model is available in the Extrude1. CATPart from the samples directory. 1. Click the Extrusion icon . 2.
Select a sketch. The Extrusion Definition dialog box is displayed. Several types of extrusion are available: Dimension : the requested input data are a sketch and a dimension, Up to plane or Up to surface: a plane or a surface are input as limit to the extrusion. These functions are used to create walls that are not rectangular. 3. Edit the Length1 and Length2 to set both extremities, for option Dimension. Extruding http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1100. htm (1 of 4) [12/7/2001 5:13:25 PM] 4. Define the options as needed: Check the option Mirrored extent to extent the material on both sides of the sketch.
In that case, only Length1 can be edited. This option is only available if the type is set to Dimension. Extruding http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1100. htm (2 of 4) [12/7/2001 5:13:25 PM] Push Invert Material Side to invert the direction of the creation of the material. 5. Click OK. The walls corresponding to the selected sketch are created according to the specified options, and added to the specification tree. When the extrusion is the first Sheet Metal feature of the Part, the reference wall is the first wall created based on the first segment of the sketch.
For option Up to Surface, while the wall end that is limited by the surface has the shape of the surface, its thickness does not fit the surface. It is a “rectangular” polygon defined by the first edge that comes into contact with the surface. Extruding http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1100. htm (3 of 4) [12/7/2001 5:13:25 PM] Check Symmetrical thickness to create thickness inside and outside the sketch. Such an extrusion can also be performed on a sketch made of lines and arcs of circle, provided there are no tangency discontinuities between the different elements. However, in this ase, the Up to plane or Up to surface capabilities are not available, and you cannot isolate such an extrusion. Extrusion walls can be edited and/or isolated. The sketch may not be closed. Extruding http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1100. htm (4 of 4) [12/7/2001 5:13:25 PM] Isolating Walls This task explains how to isolate a wall. This is possible in two cases: 1. after having created walls by extrusion (see Extruding) 2. after having created a wall on edge (see Creating Walls from an Edge). You must have defined the Sheet Metal parameters. A model is available in the Extrude2. CATPart from the samples directory.
Isolating Extruded Walls Right-click the Extrusion. 1 feature and choose the Extrusion. 1 object -; Isolate contextual menu item. 1. The Extrusion Isolate dialog box is displayed. Select one of the wall of the extrusion to be isolated. 2. The selected wall is highlighted in the geometry. This wall is the reference wall, meaning that it can be modified and the other walls will take the modification into account. On the other hand if the other walls are modified the reference wall is an anchoring wall, and modifications will be made around it. The Extrusion Isolate dialog box is updated. 3. Click OK in the dialog box.
The walls of the extrusion have been isolated, each with its own sketch. Yet coincidence constraints are automatically generated between the isolated walls. Isolating Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1701. htm (1 of 4) [12/7/2001 5:13:25 PM] The extrusion’s initial sketch is retained (Sketch. 1 in the example above). Double-click the sketch of the reference wall (here Sketch. 3) and modify it by increasing its length. 4. Exit the Sketcher using the Exit icon . 5. The Part is updated. You can note that the wall that was adjacent to the pad, now lies on it, as it is the reference wall that was modified.
Isolating Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1701. htm (2 of 4) [12/7/2001 5:13:25 PM] However, had you modified the sketch of the wall lying on the pad (Sketch. 4), moving it further away from Wall. 2 as shown here to the right, the updated pad would not take the gap between the walls into account. The resulting part looks like this (Wall. 3 has been modified but still coincides with Wall. 2): Isolating Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1701. htm (3 of 4) [12/7/2001 5:13:25 PM] You can then edit its sketch if needed. In the present case, the wall on edge had been created with a end. Therefore when isolating this wall from the reference wall, the bend is created as a separate feature that can be edited as well. The angle value between the two walls is displayed for edition. You cannot undo an Isolate action after having modified the wall. Isolating a wall on edge erases all updating data. Isolating Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1701. htm (4 of 4) [12/7/2001 5:13:25 PM] Isolating Walls on Edge Right-click the wall on edge and choose the Wall On Edge contextual menu item. 1. The wall on edge is then changed to a standard wall, as you can see from the specification tree.
Creating Rolled Walls This task shows how to create rolled walls (such as pipes, open pipes with flange, etc. ). You must have defined the Sheet Metal parameters, and have a sketch available, in the form of an circular arc. The part is available in the Rolledwall1. CATPart from the samples directory. 1. Click the Extrusion icon . 2. Select the circular sketch. 3. Make sure the type is set to Dimension. Length 1 and Length 2 indicate the location of Limit 1 and Limit 2. 4. 5. Define the options as needed (the length being down to -50 mm): Creating Rolled Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. oc/src/sheugbt1000. htm (1 of 3) [12/7/2001 5:13:26 PM] Check the option Mirrored extent to extend the material on both sides of the sketch. In that case, only Length1 can be edited. Check Symmetrical thickness to create thickness inside and outside the sketch. Push Invert Material Side to invert the direction of the creation of the material. Click OK in the dialog box to create the rolled wall: 6. Creating Rolled Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1000. htm (2 of 3) [12/7/2001 5:13:26 PM] The rolled wall is a particular extrusion: he input sketch is either a circular arc or a closed circle, the creation type is always Dimension. The sketch may be open. In that case, you can define where the opening should be. The sketch may be closed. In that case, you have no control on the opening location. The only operations you can combine with a rolled wall in a Sheet Metal model are flanges and cutouts. No other elements (standard wall, bend,… ) are allowed. Creating Rolled Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1000. htm (3 of 3) [12/7/2001 5:13:26 PM] Creating Bends on Walls
This section explains and illustrates different methods to create bends on walls. Bends can only be created between walls, whether manually or automatically, and not between any other Sheet Metal features, such as stamps for example. Create bends from wall: select the two walls, set the bend radius value, the bend extremities, and specify the use of corner relief Generate bends automatically: select the part, then a reference wall Create conical bends: select the part, and choose a reference wall Create flat bends: select a sketch, set the creation mode and limiting option, set the radius and angle in relation to the selected sketch.
Creating Bends http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0210. htm [12/7/2001 5:13:26 PM] Manually Creating Bends from Walls This task explains two ways to create bends between walls in the Sheet Metal part. These bends can be created on non-connex walls, and with a constant radius value. Open the BendExtremities01. CATPart document from the samples directory. 1. Select the Bend icon . The Bend Definition dialog box opens. Note that the Radius field is in gray because it is driven by a formula: at that time, you cannot modify the value. Select Wall. 2 and Wall. 5 in the specification tree.
The Bend Definition dialog box is updated. 2. Right-click the Radius field: the contextual menu appears. 3. Deactivate the formula: you can now change the value. 4. Enter 4mm for the Radius and click Preview. 5. The bend is previewed, along with its orientation symbolized by arrows. The Left and Right texts further indicate this orientation and are useful to define different bend extremities. Manually Creating Bends from Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0202. htm (1 of 4) [12/7/2001 5:13:27 PM] 6. Click the More button to display further options: You can define: he left and right extremity settings (see also extremities definition settings) the corner relief definition settings and the bend allowance settings. Within the Left Extremity tab, choose the Mini with round relief bend extremity type, deactivate the L1 and L2 length formulas, and set them to 6mm and 3mm respectively. 7. Click the Right Extremity tab, and choose the Curved shape type. 8. Click Preview to visualize the left and right extremities. 9. Click OK in the Bend Definition dialog box. 10. The Bend is created with the specified extremity types. Manually Creating Bends from Walls ttp://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0202. htm (2 of 4) [12/7/2001 5:13:27 PM] The extremities and the corner relief defined with the current dialog box will apply locally and prevail over any other global definition. Be careful when creating bends with square or round relief. Depending on the geometry configuration, this can lead to removing more matter than you would expect. Indeed, a corner relief being computed on the whole intersection of the elements involved (bends or bend/wall), in the following configuration the matter is removed till the end of the wall.
Bend with no relief Bend with square relief In this case, it is best to replace the bend corner relieves with cutouts (identified in red in the figure below) that will act as corner relieves removing matter to the part. Manually Creating Bends from Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0202. htm (3 of 4) [12/7/2001 5:13:27 PM] Generating Bends Automatically This task explains how to automatically generate bends between walls in the Sheet Metal part. You can first create all the bends, then modify the parameters for any of the generated bends.
However, when an ambiguity arises, that is when more than two bends end on the same vertex, the bends are not automatically generated. You then need to create them manually, so as to explicitly select the walls between which the bends are to be created. Open the BendExtremities01. CATPart document from the samples directory. 1. Select the Automatic Bends icon . The bends are created. Generating Bends Automatically http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0206. htm (1 of 4) [12/7/2001 5:13:27 PM] Double-click the bend of interest: Bend. 4 The Bend Definition dialog box opens. 2. Right-click the Radius field: the contextual enu appears. 3. Deactivate the formula: you can now change the value. 4. Enter 4mm for the Radius and click Preview. 5. Bend. 4 is modified. 6. Click the More button to display further options: You can re-define: the left and right extremity settings (see also extremities definition settings) the corner relief definition settings and the bend allowance settings. Generating Bends Automatically http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0206. htm (2 of 4) [12/7/2001 5:13:27 PM] Within the Left Extremity tab, choose the Mini with round relief bend extremity type, deactivate the L1 and L2 length formulas, and set them o 6mm and 3mm respectively. 7. Click the Right Extremity tab, and choose the Curved shape type. 8. 9. Click OK in the Bend Definition dialog box. The bend is modified with the specified options The extremities and the corner relief defined with the current dialog box will apply locally and prevail over any other global definition. Push the more button to display; the extremities definition settings and the corner relief definition settings and the bend allowance settings. Generating Bends Automatically http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0206. htm (3 of 4) [12/7/2001 5:13:27 PM] Creating Conical Bends
This task explains how to generate conical bends between two walls in the Sheet Metal part. These bends are different from the standard bend in that they allow different radius values at each end of the bend. Open the ConicalBend1. CATPart document from the samples directory. Select the Conic Bend icon . The Conic Bend Definition dialog box opens. 1. Select Wall. 1 and Wall. 2 in the specification tree or in the geometry. The Bend Definition dialog box is updated, and arrows are displayed indicating the walls orientation. 2. You can click on the arrow to invert them if needed. The LIM1 and LIM2 texts indicate the endpoints for the bend.
Enter the radius values for each end of the conical bend. If the difference between the specified radius values does not allow the generation of a cone with an angle greater than 1 degree, a warning is issued prompting you to increase one of the radii. Click OK in the Warning dialog box, and increase/decrease the radius values. 3. Conical Bends http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0204. htm (1 of 3) [12/7/2001 5:13:27 PM] By default, Radius 2 is twice Radius 1. 4. Click More… to display further options. 5. Choose the bend extremities: Mini with no relief: the shortest possible bend is created, and presents no relief
Curve shaped: the bend is created keeping the tangency continuity with the support walls. Maximum: the bend is calculated between the furthest opposite edges of the supporting walls. 6. Click OK. The Bend is created. The two walls must be connected by the edge of their internal faces. The Angle field is locked. It indicates the angle value between the two walls between which the bend is computed. Conical Bends http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0204. htm (2 of 3) [12/7/2001 5:13:27 PM] Should you choose the Curve shaped extremity option, the bend would look like this:
Conical Bends http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0204. htm (3 of 3) [12/7/2001 5:13:27 PM] Creating Bends From a Line This task explains how to generate bends based on a line (also called flat bends) in the Sheet Metal part. A wall and a bend are created. Open the FlatBend1. CATPart document from the samples directory. Select the reference wall then the Bend From Flat icon . 1. The Bend From Flat Definition dialog box opens. Select a sketch (Sketch. 3 here). This sketch must necessarily be a line. 2. 3. You can choose the line extrapolation option: he line is extrapolated up to the wall edge (Bend From Flat Until) the line is not extrapolated, and the bend is limited to the line’s length (Bend From Flat Length) Set the bend radius value. You may need to deactivate the formula using the Formula -; Deactivate contextual menu on the Radius field. 4. 5. Set the angle value between the generated wall and the reference wall. 6. Click OK to create the bend. Bends From Line http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0205. htm (1 of 2) [12/7/2001 5:13:28 PM] When creating such a bend on a reference wall (first wall), an arrow indicates which part is to be folded.
Click this arrow to invert the side that will be bent. Such bends cannot be created, if the section to be folded already intersects the part. Bends from line should be performed on end walls, or prior to creating further walls on the bent one. Perform the bend before creating the stamping features, as stamps are not retained when the part is folded with the bend. Bends From Line http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0205. htm (2 of 2) [12/7/2001 5:13:28 PM] Creating Swept Walls This section explains and illustrates how to create and use various kinds of swept walls, i. e. alls based on a given contour that is swept along a spine. Create a flange: select a spine, and set the radius, length, and angle values. Create a hem: select a spine, and set the radius, and length values. Create a tear drop: select a spine, and set the radius, and length values. Create a swept flange: select a spine, and a user-defined profile Redefine swept walls limits: choose the Relimited type, and select a point lying on the spine or a plane normal to the spine and intersecting it as limits Display swept walls axes in drafting sheets: open a CATDrawing document, click the Unfolded View icon, and select a plane
Selecting the Spine Whatever the type of the swept wall you wish to create, you first need to select one or more contiguous edges to make up the spine along which the contour, either pre- or user-defined, is to be swept. You can: manually select one, or more, edge(s) Selection without propagation Resulting flange without propagation select one edge and click the Tangency Propagation button: all contiguous and tangent edges are selected. In this case, would you need to remove one edge, you need to manually select it. Remember that only extremity edges can be removed without breaking the continuity between edges.
Creating Swept Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0600. htm (1 of 2) [12/7/2001 5:13:28 PM] Selection with propagation Resulting flange with propagation Creating Swept Walls http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0600. htm (2 of 2) [12/7/2001 5:13:28 PM] Creating a Flange This task explains how to generate a flange from a spine and a profile. Open the SweptWall01. CATPart document from the samples directory. 1. Select the Flange icon . The Flange Definition dialog box opens. 2. Select the edge as shown in red. Creating a Flange http://arbredsy/FmoCXR8/SheEnglish/sheug. oc/src/sheugbt0601. htm (1 of 3) [12/7/2001 5:13:28 PM] Enter 2mm in the Radius field, 10mm in the Length field and 120° for the Angle. 3. Click the More button to display the Bend Allowance tab allowing you to locally redefine the bend allowance settings. You may need to deactivate the formula using the contextual menu on the field and choosing Formula -; Deactivate before editing the value. 4. In this case, the new K Factor value overrides the value set in the Sheet Metal Parameters. 5. Click OK to create the flange. Creating a Flange http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0601. tm (2 of 3) [12/7/2001 5:13:28 PM] The feature is added to the specification tree. Use the Tangency Propagation button to select all tangentially contiguous edges forming the spine (see Selecting the Spine). You can redefine the flange limits by choosing the Relimited option (see Redefining Swept Walls Limits). Creating a Flange http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0601. htm (3 of 3) [12/7/2001 5:13:28 PM] Creating a Hem This task explains how to generate a hem from a spine and a profile. The SweptWall01. CATPart document is still open from the previous task. If not, open the SweptWall02.
CATPart document from the samples directory. Select the Hem icon in the Swept Walls sub-toolbar. 1. The Hem Definition dialog box opens. 2. Select the edges as shown in red. Creating a Hem http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0602. htm (1 of 3) [12/7/2001 5:13:29 PM] Enter 2mm in the Radius field, and 3mm in the Length field. 3. Click the More button to display the Bend Allowance tab allowing you to locally redefine the bend allowance settings. You may need to deactivate the formula using the contextual menu on the field and choosing Formula -; Deactivate before editing the value. 4.
In this case, the new K Factor value overrides the value set in the Sheet Metal Parameters. 5. Click OK to create the hem. Creating a Hem http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0602. htm (2 of 3) [12/7/2001 5:13:29 PM] The feature is added to the specification tree. Use the Tangency Propagation button to select all tangentially contiguous edges forming the spine (see Selecting the Spine). You can redefine the hem limits by choosing the Relimited option (see Redefining Swept Walls Limits). Creating a Hem http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0602. htm (3 of 3) [12/7/2001 5:13:29 PM] Creating a Tear Drop
This task explains how to generate a tear drop from a spine and a profile. The SweptWall01. CATPart document is still open from the previous task. If not, open the SweptWall03. CATPart document from the samples directory. Select the Tear Drop icon in the Swept Walls sub-toolbar. 1. The Tear Drop Definition dialog box opens. 2. Select the edge as shown in red. Creating a Tear Drop http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0603. htm (1 of 3) [12/7/2001 5:13:29 PM] Enter 3mm in the Radius field, and 8mm in the Length field. 3. Click the More button to display the Bend Allowance tab allowing you to ocally redefine the bend allowance settings. You may need to deactivate the formula using the contextual menu on the field and choosing Formula -; Deactivate before editing the value. 4. In this case, the new K Factor value overrides the value set in the Sheet Metal Parameters. 5. Click OK to create the tear drop. Creating a Tear Drop http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0603. htm (2 of 3) [12/7/2001 5:13:29 PM] The feature is added to the specification tree. Use the Tangency Propagation button to select all tangentially contiguous edges forming the spine (see Selecting the Spine).
You can redefine the tear drop limits by choosing the Relimited option (see Redefining Swept Walls Limits). Creating a Tear Drop http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0603. htm (3 of 3) [12/7/2001 5:13:29 PM] Creating a Swept Flange This task explains how to generate a swept flange from a spine and a user-defined profile. The SweptWall01. CATPart document is still open from the previous task. If not, open the SweptWall04. CATPart document from the samples directory. 1. Using the Sketcher , define a profile in the yz plane as shown below: Then quit the Sketcher, using the Exit icon
Select the Swept Flange icon in the Swept Walls sub-toolbar. 2. The User Defined Flange Definition dialog box opens. 3. Select the edge and the profile, as shown in red. Creating a Swept Flange http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0604. htm (1 of 3) [12/7/2001 5:13:29 PM] The dialog box looks like this: Click the More button to display the Bend Allowance tab allowing you to locally redefine the bend allowance settings. You may need to deactivate the formula using the contextual menu on the field and choosing Formula -; Deactivate before editing the value. 4.
In this case, the new K Factor value overrides the value set in the Sheet Metal Parameters. 5. Click OK to create the swept flange. Creating a Swept Flange http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0604. htm (2 of 3) [12/7/2001 5:13:29 PM] The feature is added in the specification tree. Use the Tangency Propagation button to select all tangentially contiguous edges forming the spine (see Selecting the Spine). You can redefine the tear drop limits by choosing the Relimited option (see Redefining Swept Walls Limits). Creating a Swept Flange http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0604. tm (3 of 3) [12/7/2001 5:13:29 PM] Redefining Swept Wall Limits This task explains how to redefine the spine’s limits when creating any type of swept walls, using existing geometric elements: points lying on the spine or intersecting planes.. Open the SweptWall01. CATPart document. 1. Select the Flange icon . The Flange Definition dialog box opens. Using the combo list, choose the Relimited type. 2. The Flange Definition dialog box is updated and now displays two Limit fields. Select the spine. Here we select a single edge. See also Selecting the Spine. 3. Redefining Swept Walls Limits http://arbredsy/FmoCXR8/SheEnglish/sheug. oc/src/sheugbt0606. htm (1 of 2) [12/7/2001 5:13:30 PM] Successively select the two limiting elements. Here we select a point lying on the spine as the first selecting element, and a plane intersecting the spine as the second limiting element. 4. Make sure intersecting elements are normal to the spine, and they intersect it only once. Specify the swept wall values. In the example of the flange you set the Radius, Length and Angle values. You may also click More >> to display further options. See Creating a Flange. 5. 6. Click OK. The swept wall is created within the limits on the spine. Redefining Swept Walls Limits ttp://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0606. htm (2 of 2) [12/7/2001 5:13:30 PM] Displaying Swept Wall Axes This task explains how to generate an unfolded view of a part with swept wall in a drawing sheet including the axes of planar hems, tear drops, and flanges are displayed within the drawing. The SweptWall01. CATPart document is still open from the previous task. If not, open the SweptWall05. CATPart document from the samples directory. Make sure that the Generate axis button is checked in the Tools -> Options -> Mechanical Design -> Drafting -> Generation tab, prior to generating a view in a .
CATDrawing document. 1. Click or select File -> New… 2. Select the Drawing type and click OK. 3. Click OK. For more information about this workbench, refer to Generative Drafting User’s Guide. Displaying Swept Walls Axes http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0605. htm (1 of 2) [12/7/2001 5:13:30 PM] 4. The drawing sheet appears. Tile the windows horizontally using the Window -; Tile Horizontally menu item. 5. Select the Unfolded View icon in the Projections toolbar from Generative Drafting Workbench. 6. This icon is added to the Projections toolbar provided the Sheet Metal workbench is present.
Choose the xy plane in the Sheet Metal specification tree. The unfolded view is displayed with the planar swept wall axes. 7. Displaying Swept Walls Axes http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt0605. htm (2 of 2) [12/7/2001 5:13:30 PM] Unfolding Unfolded Sheet Metal parts can be displayed in two ways: Folded/Unfolded View Access Concurrent Access Each Sheet Metal feature is created in a given view: folded, or unfolded. Editing a feature must be done in its definition view. If not, a message is automatically issued, prompting you to change views, before editing the feature. Unfolding http://arbredsy/FmoCXR8/SheEnglish/sheug. oc/src/sheugbt1200. htm [12/7/2001 5:13:30 PM] Folded/Unfolded View Access This task shows how to unfold the part. 1. Click the Unfold icon . The part is unfolded according to the reference wall plane, as shown below. 2. Click this icon again to refold the part for the next task. Bend limits and stamping are now displayed in the unfolded view. When designing in context, If a CATProduct document contains several SheetMetal parts, only one part can be visualized in the unfolded view at a time. Folded/Unfolded View Access http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1201. htm [12/7/2001 5:13:30 PM] Concurrent Access
This task explains how to display the Sheet Metal part in two windows: one with the folded view, one with the unfolded view. Any modification in one window is displayed in the other window. 1. Click the Multi-view icon . The part is unfolded in a second window. 2. Choose the Window -; Tile Horizontally menu item. Both windows are tiled. Activate the window in which you want to work. Concurrent Access http://arbredsy/FmoCXR8/SheEnglish/sheug. doc/src/sheugbt1202. htm (1 of 2) [12/7/2001 5:13:30 PM] Any modification in one view is taken into account in the other view enabling the user to make modifications in the best possible context.
In the multi-view mode as in the standard unfolded view, all constraints are displayed in the geometrical views. Once in the Multi-view mode, the standard icon Unfold is not longer available. The Multi-view function is not available from a standard unfolded view. Only parts with bends can be unfolded. Cutting faces and open faces are not displayed in Multi-view mode. Concurrent Access